Sunoco Fuels
Wherever in the world you race, you can count on Sunoco to have a consistent, high quality product to meet your racing application.
Sunoco GT
Sunoco GT Unleaded is designed for high performance street cars, muscle cars, clasics, street rods, motorcycles, karts and marine applications. With the highets octane rating of any street legal fuel, Sunoco GT will allow significantly increased boost levels in supercharged or turbocharged applications.
Sunoco GT contains no metallic compounds to harm catalytic converters or oxygen sensors. It contains a comprehensive additive package for greater engine protection and reduced fuel system deposits as measured by the BMW test. Sunoco GT is also compatible with virtually all two-stroke synthetic and mineral based motor oils.
Technical Specifications of Sunoco GT Fuel
| Specific Gravity | 0.760 |
|---|---|
| Research Octane (RON) | 105 |
| Motor Octane (MON) | 95 |
| Antiknock Index (R+M)/2 | 100 |
| Reid Vapor Pressure (psi) | 8 |
| Distillation (Centigrade) | |
| Initial Boiling Point | 32 |
| 10% Evaporation | 66 |
| 50% Evaporation | 99 |
| 90% Evaporation | 110 |
| Final Boiling Point | 127 |
| Oxidation Stability (Min) | 1440+ |
| Copper Strip Corrosion | No 1 |
| Existent Gum (mg per 100ml) | 1 |
| Oxygen (Wt%) | 2.7 |
Sunoco FR
Sunoco FR is specifically designed to meet Federation Internaionalle de l'Automobile (FIA) and Federation Internationale de Motocyclisme (FIM) specifications. Sunoco FR is a high octane (102 RON) unleaded and oxygenated (3.7%) racing fuel engineered to provide maximum power within current legislations. Sunoco FR is proved to increase torque and peak power in highly stressed turbo engines as well as in air restricted normally aspirated race engines.
Sunoco FR is specifically formulated for the professional racer and should not be used on the street.
Technical Specifications of Sunoco FR Fuel
| Specific Gravity | 0.7543 |
|---|---|
| Research Octane (RON) | 102.0 max |
| Motor Octane (MON) | 90.0 max |
| Antiknock Index (R+M)/2 | Report |
| Reid Vapor Pressure (psi) | 9.0 max |
| Distillation (%) | |
| Evaporation at 70 C | 20 |
| Evaporation at 100 C | 60 |
| Evaporation at 180 C | 100 |
| Final Boiling Point | 160 max |
| Residue | 2% vol max |
| Oxygen (Wt%) | 3.7 |
Sunoco Supreme
Sunoco Supreme is a true high performance leaded racing fuel designed for sophisticated high compression engines which routinely function between 7,000 and 10,000 rpm. Sunoco Supreme is trusted by some of the most respected names in motorsports. It is specially formulated with low sensitivity to achieve a high motor octane value for increased protection against detonation under severe operating conditions over higher sensitivity fuels of the same antiknock index. Sunoco Supreme is recommended for two- and four-stroke applications up to 15:1 compression ratio.
Sunoco Supreme is specifically formulated for the professional racer and should not be used on the street.
Technical Specifications of Sunoco Supreme Fuel
| Specific Gravity | 0.715 |
|---|---|
| Research Octane (RON) | 114 |
| Motor Octane (MON) | 110 |
| Antiknock Index (R+M)/2 | 112 |
| Reid Vapor Pressure (psi) | 8 |
| Distillation (Centigrade) | |
| Initial Boiling Point | 32 |
| 10% Evaporation | 68 |
| 50% Evaporation | 102 |
| 90% Evaporation | 113 |
| Final Boiling Point | 127 |
| Oxidation Stability (Min) | 1440+ |
| Copper Strip Corrosion | No 1 |
| Existent Gum (mg per 100ml) | 1 |
| Oxygen (Wt%) | - |
